9 November 2026
VLCC vs Suezmax vs Aframax: telling tanker size classes apart in overhead imagery

If you've ever pulled up a chip on an AIS feed and had to guess the tonnage before the vessel even squawks its name, you already know the problem. A lot of tankers running dark or on a delayed transponder ping still leave a hull shape behind in overhead imagery, and that shape tells you more than people give it credit for.
Length is the first tell, not tonnage
Deadweight is the number everyone quotes, but you can't measure deadweight from a picture. What you can measure is length overall, and the three main crude classes stack up cleanly enough to pixel-count:
- Aframax: roughly 245-250 m LOA, carrying somewhere around 750,000 barrels.
- Suezmax: roughly 275-285 m LOA, the class built to clear the canal loaded, around 1 million barrels.
- VLCC: roughly 330-333 m LOA, 2 million barrels or more, too big for Suez laden.
At sub-meter GSD, that 30-40 m gap between Aframax and Suezmax, and the similar gap between Suezmax and VLCC, is not subtle. It's the difference between a hull that fills maybe 40% of a standard tile and one that fills 55%. Once you've eyeballed a dozen confirmed VLCCs against a dozen confirmed Suezmaxes, the length jump stops needing a ruler.
Where it gets harder is mid-fleet variance. Shipyards have pushed Suezmax hulls longer over the past two decades to squeeze in more cargo without touching beam, so a modern Suezmax can creep close to 285 m and start crowding the low end of what some yards call a VLCC. If you're working off length alone near that boundary, don't force a call. Flag it as "large tanker, class uncertain" and move on rather than guessing wrong on a fixture rumor.
Beam and parallel midbody as the second check
Length is the headline, but beam confirms it. VLCCs run close to 60 m across, Suezmax sits around 48-50 m, Aframax around 42-44 m. The ratio of length to beam stays fairly consistent across all three classes, somewhere near 5.5 to 1, so if a hull reads long but narrow in your crop, check your scaling before you file the flag. A stretched tile will give you a false VLCC every time.
The other tell is parallel midbody, the straight-sided run of hull between the bow taper and the stern taper. VLCCs carry a long, almost rectangular midbody because the extra cargo volume has to go somewhere between two hulls built to roughly the same beam as a Suezmax relative to their length. Aframax hulls look stubbier end to end, with the bow and stern curvature taking up proportionally more of the total length. If you're staring at a crop with no name, no AIS, and a fuzzy edge on the bow, the midbody shape is often the tiebreaker between "could be VLCC" and "definitely Suezmax."
Where this breaks down
Hull class tells you the vessel's capacity. It says nothing about how much of that capacity is filled right now, loaded to the marks or empty and riding high. A VLCC riding high with a wide freeboard band and exposed red boot-top is still a VLCC, just one running in ballast. Mistaking a ballasted VLCC for a smaller laden class is a real way to misjudge a cargo picture. Class identification and loading state use the same imagery to answer two different questions.
It also breaks down on product tankers and chemical carriers built to unusual proportions, on anything mid-conversion or laid up with gear removed, and on crops where cloud or sun glare eats the stern. Treat length and beam as a strong first pass for sorting a fleet list, then lean on AIS correlation and port-call history to close the gap on anything ambiguous.
For the desk, the real question usually isn't "what class is this hull," it's "is she loaded or riding light," which is the piece Ship Loading State is built around: a weekly freeboard and waterline read, per vessel, without waiting on a port call to confirm it.
If sorting tanker size class is step one of your week, get on the pilot list and let the loading-state flag handle step two.